Ram Type Milling Machin

APPLICATION

Ram Type Universal Milling Machine With Digital Display is a newly developed product based on traditional knee type milling machine and has more advanced features than the general one. This machine can mill any angle surface through front half-sphere by swiveling milling head. Enlarged machining capacity, widened spindle speed range, infinitely speed changing, two sets operating handles for easy operation, interlock between locking and power/manual feed system, automatic lubrication system, sufficient rigidity and so on. This machine can mill plane, groove, slant groove, even can mill plane and groove in cavity of some workpieces. It is suitable for metal-working operation of all kinds of factories, especially for die and mould.

Name			Unit	XS5750A XS5756A	XS5750A/1 XS5756A/1	XS5750A/2 XS5756A/2
Working table W×L			mm	500×1435 560×1435	500×1635 560×1635	500×2000 560×2000
T Slot		Number		5
		Width	mm	18
		Distance	mm	80
Travel of table		Longitudinal	mm	1100	1300	1500
		Vertical	mm	500
Travel of ram		Cross	mm	750
Min. distance between spindle nose and table surface			mm	60
Swivel angle of milling head				Any 360° in front half-sphere
Spindle taper				ISO50	ISO50	ISO50
Spindle speeds		Range	rpm	30~2050
		Number		27
Feed range of table and ram		Longitudinal	mm/min	10~2600
		Cross	mm/min	10~2600
		Vertical	mm/min	5~1300
Number of feeds				infinitely
Rapid feeds of table and ram	Longitudinal		mm/min	2600
	Cross		mm/min	2600
	Vertical		mm/min	1300
Spindle motor	Power		kW	7.5	7.5
	Speed		rpm	1440
Feed motor	Torque		NM	X:Y:15Z:20	X:Y:15, Z:20
	Speed		rpm	1250
Resolution of digital display			mm	0.005
Positioning accuracy			mm	0.05
Reset accuracy			mm	±0.01
Max. bearing weight of table			Kg	1800	1800
Overall dimensions（L×W×H）			mm	2100×2500×1970	2100×2700×1970	2100×2900×1970
Net weight			Kg	3300	3500	3700