Ram Type Milling Machin

APPLICATION

Ram Type Milling Machine With Digital Display is a newly developed product based on traditional knee type milling machine and has more advanced features than the general one. This machine can mill any angle surface through front half-sphere by swiveling milling head. Enlarged machining capacity, widened spindle speed range, infinitely speed changing, two sets operating handles for easy operation, interlock between locking and power/manual feed system, automatic lubrication system, sufficient rigidity and so on. This machine can mill plane, groove, slant groove, even can mill plane and groove in cavity of some workpieces. It is suitable for metal-working operation of all kinds of factories, especially for die and mould.

Name				Unit	XS5646 X5646	XS5646/1 X5646/1
Working table W×L				mm	460×1435	460×1635
T Slot			Number		5
			Width	mm	18
			Distance	mm	80
Travel of table			Longitudinal	mm	900	1000
			Vertical	mm	500
Travel of ram			Cross	mm	700
Min. distance between spindle nose and table surface				mm	40
Swivel angle of milling head					Any 360° in front half-sphere
Spindle taper					ISO40	ISO50
Spindle speeds			Range	rpm	30~2050
			Number		27
Feed range of table and ram			Longitudinal	mm/min	10~1000
			Cross	mm/min	10~1000
			Vertical	mm/min	6~640
Number of feeds					Infinitely
Rapid feeds of table and ram		Longitudinal		mm/min	2200(single motor) 2540（doublemotor）
		Cross		mm/min	2200(single motor) 2540（doublemotor）
		Vertical		mm/min	1460(single motor) 1700（doublemotor）
Spindle motor		Power		kW	5.5	7.5
		Speed		rpm	1440
Feed motor		Torque		NM	15	30
		Speed		rpm	1500
Rapid feed motor	Power			kW	3
	Speed			rpm	1500
Resolution of digital display				mm	0.005(only for xs5646series)
Positioning accuracy				mm	0.05(only for xs5646series)
Reset accuracy				mm	±0.01(only for xs5646series)
Max. bearing weight of table				Kg	1000	1500
Overall dimensions（L×W×H）				mm	2050×2200×1950	2050×2600×1950
Net weight				Kg	3000	3200