Power Feed

1. AS series POWER FEED
Resume:　
    Our products already reached to the international advanced level of 90's. It already formed series products of different Voltage, different Power and different direction of feed.
Usage:
    This power feed is especially built for milling machines, drilling & milling machines without power feeding. Working together with the milling tables, it simplifies the drive mechanism, increases milling efficiency and reduces the cost of the milling machine .
    It offers high speed and continuous variable speed, the ability to feed both directions along X-axis of the table. With different adapters and relevant mounting parts, it feeds for cross (Y) axis and knee (Z) axis in two directions as well .
    POWER FEED can be install by horizontal, also can be put to use of each light transport, and so on.

Model & Specification：

Directions of Feed	Model	Voltage	Output Torque
X Axis <longitudinal feed>	AS235	110V 50/60 HZ	15N.M (135LBS)
		220V 50/60 HZ
		240V 50/60 HZ
	AS250	110V 50/60 HZ	17N.M (150LBS)
X Axis <longitudinal feed>(Horizontal arrangement)	AS235 （Horizontal）	110V 50/60 HZ	15N.M (135LBS)
		220V 50/60 HZ
		240V 50/60 HZ
Y Axis <Cross Feed>	AS235	110V 50/60 HZ	15N.M (135LBS)
		220V 50/60 HZ
		240V 50/60 HZ
	AS250	110V 50/60 HZ	17N.M (150LBS)
Z Axis <Knee-Lift Feed>	AS250	110V 50/60 HZ	17N.M (150LBS)
Other Specification:
Speed Range	0-135R.P.M	0-140R.P.M
Rapid Speed	180R.P.M	200R.P.M

China Rui Feng Corp., Ltd.

TEL: +86-532-5819106 2971386

FAX: +86-532- 5829250 2971397

Email: sales@echinatool.com support@echinatool.com

Add: 32/F, International Trade Mansion, No.51, TaiPing road, QingDao, China 266001